Service Activation Center Diagnostics & Monitoring

How to configure your SAC environment to obtain useful Cable Modem diagnostic and monitoring information in your environment. Provides configuration details on the SAC service and pollers allowing SNMP Device Diagnostics, CMTS Flap List population, Cable Modem Usage, DHCP Lease information, Ping, Trace route and Cable Modem graphs.

Continue Reading
  • Share:

The CLI Cheat Sheet: Add DHCP options to a Rule or Client Class

Command Line Interface (CLI) is a useful tool for network administrators with access to the back end of Incognito Software products. This guide provides seven useful tips on how to CLI can be used to improve operational efficiency in Broadband Command Center, a DHCP provisioning solution from Incognito Software.

Add DHCP options to a Rule or Client Class

Continue Reading
  • Share:

The CLI Cheat Sheet: Add and modify client classes

Command Line Interface (CLI) is a useful tool for network administrators with access to the back end of Incognito Software products. This guide provides seven useful tips on how to CLI can be used to improve operational efficiency in Broadband Command Center, a DHCP provisioning solution from Incognito Software.

Add and modify client classes

You can create and modify a client class through the DHCP service. Note that administrators that use MPS for their subscriber management will use that service’s CLI to manipulate Client Class membership. This section will discuss Client Class modification via DHCP only.

When working with a client class, the basic commands that can be used are:

Continue Reading
  • Share:

The CLI Cheat Sheet: Set config.txt Variables

Command Line Interface (CLI) is a useful tool for network administrators with access to the back end of Incognito Software products. This guide provides seven useful tips on how to CLI can be used to improve operational efficiency in Broadband Command Center, a DHCP provisioning solution from Incognito Software.

Set config.txt Variables

Any variable that can be found in the config.txt file can be set via CLI using the following format:

Continue Reading
  • Share:

The CLI Cheat Sheet: Add DOCSIS files to DHCP

Command Line Interface (CLI) is a useful tool for network administrators with access to the back end of Incognito Software products. This guide provides seven useful tips on how to CLI can be used to improve operational efficiency in Broadband Command Center, a DHCP provisioning solution from Incognito Software.

Add DOCSIS files to DHCP

When working with a DOCSIS configuration file, the basic commands that can be used are:

Continue Reading
  • Share:

The CLI Cheat Sheet: Add DHCP Rules

Command Line Interface (CLI) is a useful tool for network administrators with access to the back end of Incognito Software products. This guide provides seven useful tips on how to CLI can be used to improve operational efficiency in Broadband Command Center, a DHCP provisioning solution from Incognito Software.

Add a DHCPv4 rule to the DHCP service:

Continue Reading
  • Share:

The CLI Cheat Sheet: Add a Cable Modem or MTA to the Subscriber

Command Line Interface (CLI) is a useful tool for network administrators with access to the back end of Incognito Software products. This guide provides seven useful tips on how to CLI can be used to improve operational efficiency in Broadband Command Center, a DHCP provisioning solution from Incognito Software.

Add a Cable Modem or MTA to the Subscriber

Once the subscriber account has been created, you can then assign devices to that subscriber. The administrator must be in the modify subscriber mode in order to assign devices to that subscriber:

Continue Reading
  • Share:

The CLI Cheat Sheet: Add a Subscriber

Command Line Interface (CLI) is a useful tool for network administrators with access to the back end of Incognito Software products. This guide provides seven useful tips on how to CLI can be used to improve operational efficiency in Broadband Command Center, a DHCP provisioning solution from Incognito Software.

How to Add a Subscriber

Simply add a subscriber with this command:

Continue Reading
  • Share: